LePage 295 mL PL700 Tub & Shower Surround Construction Adhesive (Clear)

LePage PL700 Tub Surround Adhesive has been specifically designed to bond most bathroom and shower enclosures. It is unaffected by moisture, steam, water, heat or cold when fully cured. PL700 will not harm tub kit materials if used as directed.

The professional and DIY choice for bonding bathtub and shower enclosures of all kinds including polystyrene, acrylic, ABS and Barker Panel Board, to drywall, painted surfaces, cement, wood and ceramic tile

Features and Benefits:

• Permanently bonds bathtub and shower surround kits to walls
• Unaffected by moisture, steam, water, heat or cold when fully cured
• Fast setting
• Easy to use
• Perfect for plastic panels, will not deform plastics or other composite materials (follow manufacturer’s recommended installation instructions)
• Use above 5’C

Ideal Substrates:

• Ceramic tile, drywall, plywood, concrete and masonry, waterproof wallboard, painted surfaces and most common building materials

Preparation:

• Surfaces must be sound, clean, dry and free of loose paint, grease, dust and any foreign materials
• Ceramic tile should be thoroughly sanded prior to application of adhesive
• Painted surfaces must be well cured and free of loose paint

Application:

• Cut nozzle to desired size opening
• Place cartridge in caulking gun and puncture the seal inside the nozzle
• Apply a 1/4″ continuous bead in accordance with the kit manufacturer’s installation instructions
• After applying the adhesive, press the pre-fitted panel firmly to the wall and then pull it away from the wall
• Wait for 5 to 10 minutes to allow the adhesive to breath, and then press the panel back into place
• To ensure proper bond, press firmly on all surfaces in contact with the adhesive
• Brace all panels with LePage Tub & Tile caulk or LePage Bath & Kitchen Silicone
• Sealants should be aged 48 hours after installation before use

Coverage:

• Requires 3-300mL tubes per kit (average)

Clean Up:

• Application tools and excess adhesive should be cleaned with mineral spirits
• The surface of the Tub enclosure may be cleaned with alcohol